Mourad Metals, located in Tunis, Tunisia, stands out as a top manufacturer and supplier of high-performance NIMONIC 105 bars and rods. With a solid reputation in the realm of superalloys, Mourad Metals provides products that meet the rigorous standards of industries like aerospace, power generation, and chemical processing. Their NIMONIC 105 bars and rods are meticulously crafted, ensuring top-notch quality, consistent dimensions, and outstanding reliability. With a strong commitment to innovation and customer satisfaction, Mourad Metals blends advanced metallurgical techniques with strict quality control, delivering materials that can endure extreme temperatures, corrosion, and mechanical stresses—making them a go-to choice for critical engineering applications.
NIMONIC 105 bars and rods are nickel-based superalloys, typically composed of nickel, chromium, cobalt, titanium, and molybdenum. This unique blend offers remarkable high-temperature strength, excellent resistance to corrosion and oxidation, and stability during thermal cycling. On the mechanical side, these bars and rods boast high creep resistance, impressive tensile strength, and durability against fatigue, making them perfect for challenging operational environments. Their microstructure guarantees dimensional stability and reliable performance in situations exposed to intense heat and stress, maintaining their integrity over long service lives, even under severe mechanical and thermal loads.
| Standards : | Nimonic 105 Rod, Bar |
| Dimensions : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Wire : | Thickness starting from 0.05mm |
| Round bar size : | Diameter: 3-~800mm |
| Hex Bar size : | 2-100mm A/F |
| Flat bar size : | Thickness: 2 -100mm / Width: 10 to 500mm |
| Square bar size : | 4 to 100mm |
| Rectangular Bars Size : | 33 x 30mm to 295 x 1066mm |
| Hollow Bar : | 32mm OD x 16mm ID to 250mm OD x 200mm ID |
| Tolerance : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Alloy | C | Si | Cu | Fe | Mn | Cr | Ti | Al | Co | Mo | Pb | S | B | Zr | Ni |
| 105 | 0.12 | 1.0 | 0.2 | 1.0 | 1.0 | 14.0-15.7 | 0.9-1.5 | 4.5-5.5 | 18.0-22.0 | 4.5-5.5 | 0.0015 | 0.010 | 0.003-0.010 | 0.15 | Bal |
| Alloy | Tensile Strength Minimum (psi) | Yield Strength Minimum 0.2% offset (psi) | % Elongation in 2″ Minimum |
| 105 | 167,000 | 112,000 | 25 |
Yes, Nimonic 115 rods can be supplied in both polished and matte finishes, depending on the specific requirements and customer preferences. These finishes are available from various suppliers.
Nimonic 115 rods are available in sizes ranging from 1/8" to 4" diameter. Finishes include cold drawn, polished, and rough turned, suitable for high-temperature applications.
Nimonic 115 rods typically come in standard sizes ranging from 1/8" to 6" in diameter, with lengths varying from 3' to 20' depending on the manufacturer and customer specifications.
These NIMONIC 105 bars and rods are extensively utilized in the aerospace and power generation industries, thanks to their exceptional high-temperature capabilities. They’re perfect for turbine blades, combustion chambers, gas turbines, and engine components where extreme heat and mechanical stress are common. Moreover, they are also used in chemical processing equipment, heat exchangers, and furnace components. Their resistance to oxidation and corrosion makes them suitable for both marine and industrial settings. Engineers trust NIMONIC 105 bars and rods for applications that demand durability and reliability.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Mourad Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Tunis, Tunisia
Copyright 2024 Mourad Metals. All rights reserved
