Mourad Metals is a trusted manufacturer and supplier of C35 round bars, proudly based in Tunis, Tunisia. They cater to a diverse array of industrial and engineering sectors. With a strong emphasis on quality, consistency, and precision, the company provides C35 round bars that align with international standards and meet customer specifications. Thanks to their modern manufacturing facilities and rigorous quality control practices, Mourad Metals guarantees excellent surface finishes, precise dimensions, and reliable performance. Their dedication to timely delivery and technical support has made them a go-to partner for carbon steel solutions, both locally and globally.
C35 round bar is a medium carbon steel grade that contains about 0.32–0.39% carbon, along with manganese levels of approximately 0.50–0.80%, and trace amounts of silicon, sulfur, and phosphorus. This specific chemical makeup strikes a great balance between strength, hardness, and ductility. C35 steel boasts moderate tensile strength, good wear resistance, and decent impact properties. It also responds well to heat treatments like normalizing and quenching and tempering, which enhances its mechanical performance for various engineering needs.
|
Variant |
Cast |
Di |
Weldability |
C % |
Si % |
Mn % |
P % |
S % |
Cr % |
Ni % |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
|
C35E |
CC |
0.98 |
CEV 0.65max |
Min |
0.35 |
0.15 |
0.50 |
– |
0.015 |
– |
– |
|
Pcm 0.49max |
Max |
0.39 |
0.35 |
0.80 |
0.030 |
0.035 |
0.30 |
0.30 |
| Variant | Condition | Format | Dimension [mm] | Yield strength min [MPa] | Tensile strength [MPa] | Elongation A5[%] | Hardness | Impact (ISO-V) strengthmin |
|---|---|---|---|---|---|---|---|---|
| Rp0.2 * Reh, ** Rel | ||||||||
| C35E | +AR | Round bar | < 20 | 345* | 520-690 | 10 | < 230 HB | 0 °C 0 J (long) 0 |
| EN | C35 (1.0501) |
| DIN | C35, CM35 |
| BS | 970 070M36 |
| UNI | C35 |
| JIS | S35C |
Considerations for installing C35 Round Bar include ensuring proper alignment, adequate support, correct machining, and adherence to safety and load-bearing requirements.
Yes, C35 Round Bar can be welded, but it requires proper preheating and post-weld heat treatment to avoid brittleness. Using appropriate welding electrodes is also essential for achieving strong, durable welds.
C35 Round Bar is available in various sizes, typically ranging from 10 mm to 250 mm in diameter, with custom sizes available upon request.
C35 round bars are often utilized in applications that require moderate strength and durability. Common uses include shafts, axles, bolts, studs, pins, gears, and connecting rods. They’re also ideal for forged parts, machine components, and general structural applications that face medium loads. Thanks to their good machinability and heat treatment capabilities, C35 round bars are widely employed in automotive parts, agricultural equipment, industrial machinery, and fabrication projects where reliable performance and cost-effectiveness are key.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Mourad Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Tunis, Tunisia
Copyright 2024 Mourad Metals. All rights reserved
